SAE 0W-16
Full Synthetic
Advanced Performance Gasoline Engine Oil, API SP.
- Part number
- 26016
- Oil type
- 100% Full Synthetic
- Service category
- API SP
- Industry standard
- ILSAC GF-6B
- Pack size
- 5 L (5.28 U.S. qt)
Application
SIMCOE Lubricants Full Synthetic SAE 0W-16 API SP is a premium class motor oil with extremely low viscosity, developed specifically to meet the high demands of modern gasoline engines. Utilizing innovative additive technology, it provides superior wear protection, exceptional engine cleanliness, and enhanced fuel efficiency. Ideally suited for engines with direct injection (GDI) and turbochargers, ensuring optimal performance under extreme conditions.
Specify 0W-16 only where the vehicle manufacturer explicitly calls for it. Most commonly, late-model Toyota, Honda and Mazda hybrid and Atkinson-cycle gasoline engines built for maximum fuel economy. Do not substitute 0W-16 into an engine specified for a heavier grade.
An innovative additive system builds a durable anti-wear film across cams, bearings and cylinder walls, holding up under the load and temperature swings of modern downsized engines.
Low-friction chemistry and a tightly controlled viscosity profile reduce parasitic drag through the valvetrain and bearings, cutting the energy the engine spends moving its own oil.
High oxidation stability and strong deposit control keep the oil in grade for longer, supporting the drain intervals published by the vehicle manufacturer.
Performance Profile
Relative performance of this grade across the five characteristics we publish on every Endura label. Measured values for each production batch are published in the corresponding lab report.
Product Data Specifications
| Product name | Endura SAE 0W-16 Full Synthetic |
|---|---|
| Series | Endura Series |
| Category | Advanced Performance Gasoline Engine Oil |
| SAE viscosity grade | 0W-16 |
| Oil type | 100% Full Synthetic |
| Base oil technology | Group III / Group IV synthetic base stock |
| API service category | SP |
| Industry standard | ILSAC GF-6B |
| Part number | 26016 |
Formulated to Meet
Suitable For
This grade is formulated to meet the performance requirements of the specifications listed above. SIMCOE Lubricants does not currently hold third-party certification or vehicle manufacturer approval for this product, and the vehicle makes listed indicate suitable applications rather than an approval by those manufacturers. Always follow the grade and specification printed in the vehicle owner’s manual.
| Pack | U.S. equivalent | Part No. |
|---|---|---|
| 5 L | 5.28 U.S. qt | 26016 |
Measured physical and chemical properties (kinematic viscosity at 40°C and 100°C, viscosity index, HTHS, flash point, pour point and total base number) are issued per production batch on the certificate of analysis. See the lab reports library or request the current batch report.
Keep out of reach of children. Avoid eye contact and prolonged contact with skin. Do not swallow. If swallowed, do not induce vomiting; call a physician or Poison Center for advice. Return used oil to a collection centre and recycle the container. A full Safety Data Sheet is available on request.
Other Grades in the Range
